Kit 1 Unlimited Duckhead conversion for Motorcycle tire changer.

<**TO USE THESE UPGRADES YOU MUST ALREADY OWN A UNIT SIMILAR TO THE HARBOR FREIGHT MANUAL TIRE CHANGER WITH THE HARBOR FREIGHT MOTORCYCLE ATTACHMENT**>

The low-profile design reduces interference and friction from the tire during the half on phase, and the rake angle of the lever clears all of the commonly used “drop center tools.” The whole design makes the tire change flow smoothly, avoiding the snags that can turn the task into a chore.

This kit is to upgrade the Harbor Freight motorcycle tire changer to use a duckhead Mount / Dismount attachment.  A duckhead unit that not only makes the process a lot easier, but also enables you to safely work on alloy rims without damage by eliminating contact with the face of the rim.

The Unlimited Duckhead is nylon and only touches the underside of the lip and prevents any contact from the leaver with the rim.

The same Duckhead Arm is used in the car and motorcycle changer.

The motorcycle kit replaces the rim clamps of the HF motorcycle tire changer with a spindle and pads with a pin that prevents the wheel from rotating

It has a 3/4 inch 20 mm spindle that passes through the wheel bearings. (Other sized spindles are available if needed.)

The duckhead fits into the swivel that mounts on the spindle and the height is set with the collet. There is an extension arm that fits into either end of the duck head for added Leverage. The kid comes with a 24 inch tire lever and a bead drop Center depressor clamp (Extra Hand)

The kit comes with a tire lever that works perfectly on the duckhead and an Extra Hand.

It is available in Red, Yellow or Black. Other colors may be available on request.

The 3/4"~20mm Motorcycle Kit 1 contains:

• Main Arm with Swivel Plate and Duckhead
• Arm Extension
• Peg and Pads: 3 covered Rim Pads (to replace the rim clamps on your tire changer),
• Adjustable Sleeve with the Thumb Screw, Locking Peg and 6 Cable Ties.
• 3/4"-20mm Motorcycle Pivot with Bushing, Collet, and Allen Wrench
• 3/4"-20mm Spindle with Nut and Washer
• 24" Tire Lever
• Extra Hand